Modellismo statico Aircraft - Dragon - MiniArt

Bf 110C-7 Luftwaffe model kit by Dragon Per saperne di più

Sand prevention filter characteristic of tropical area specification only, of course, E-7 Trop which joined the Wing Tech series of well received by combines wonderfully detail and ease of assembly reproduced firmly also differences between the E-4 on sale already was. - You can enjoy it at the size a certain presence about 27cm long and about 30cm wingspan and wing with an emphasis on speed and body shape slim, sharp finish. - Such as engine and cockpit interior also realize fully the reproduction of the big scale of only 1/32. Canopy and engine cowl assembly is possible by selecting the opening and closing. You try to put a detail up by the addition of hand slowly and carefully and cockpit engine start will be good. - I've set etched parts the seat belt. - Rotor blade parts such as rudder and ailerons use-etched parts to the mounting portion. Can be assembled at any angle. Can you assemble to choose the expression. - 20mm cannon built into the wing also modeled real. It is assembled to choose a state in which the mounting cover the wing lower surface of the state that were removed. - Are reproduced in parts of six, three-dimensional feeling enough landing gear. In addition, it sets a Part Using DS material that has been newly developed in the partition wall of the landing gear inside, and beautifully reproduced detail and internal form. I will enhance the finish of the suspension. - Marking Cartograf high quality. I've set Gunter Stein Hausen the aircraft of other 27th Fighter Wing from the North African Campaign, which gave birth to many ace. - It is the model which you can easily taste the joy of big scale model of the plane only. - Extensive use of slide mold, the main features both the height and detail ease of assembly, of perfection - Added a new mold of sand prevention filter type Trop - Cockpit interior also fully reproduced in detail. I prepare for etching parts the seat belt - The detail of the engine also fully reproduced - Rotor blade part aileron, and rudder assembly possible at any angle - The beautifully reproduced detail and shape of the partition wall of the storage in the legs that could not be reproduced with a traditional kit by using the parts of the DS material - Propeller blades can be assembled at any angle - Canopy new mold - Decal Cartograf Per saperne di più

TA 152C-1 R14 Per saperne di più

Features: - Newly tooled fuselage engine and radiator cowling - Newly tooled propeller can rotate - Newly tooled wings accurately represented real ones - Highly detailed and newly tooled radiator cowling w/options for flaps open/closed - Detailed Ta152C-0 fuselage w/accurate design - Air intake realistically produced - Tail w/fine detail - Detailed cockpit canopy made from clear parts - Canopy can be assembled open/closed - Photo-etched parts to upgrade details - Detailed landing gear As WWII progressed, Germany suffered terribly under Allied bombing raids. This meant the nation needed more effective high-altitude interceptor aircraft to fight off the heavy bombers. One solution was the Focke-Wulf Ta152, a high-altitude interceptor fighter derived from the Fw190. There were three different versions planned, with the Ta152C designed for lower-altitude operations and ground attack. Thus it had a different engine and smaller wings than the Ta152H and Ta152E. Interestingly, the name was changed from Fw to Ta to reflect the important influence paid by designer Kurt Tank. The first Ta152H entered service in January 1945, and with only a little over 40 production aircraft, it had minimal impact on the result of WWII. Because of the rush to get the aircraft into production, insufficient time was allotted to its development, leading to teething problems. Dragon has produced a new 1/48 scale kit of the Ta152. This particular kit is of the Ta152C-0, which was a pre-production aircraft. Although only one prototype was built, this kit from Dragon means it is now available to all modelers. The kit includes brand new wings, plus a new engine and radiator cowling. These new parts, as well as highly detailed elements for the rest of the aircraft, are accurately detailed and dimensionally correct. The plastic parts are sharply molded, and there are options for showing such parts as the cowling flaps or cockpit open or closed. Two frets of photo-etched parts are also offered to upgrade detail. This is an exciting kit of a novel aircraft, and for modelers wanting a late-war interceptor, this Ta152C-0 from Dragon is the answer. Per saperne di più

FW190A-5/U-14 Per saperne di più

HO-229B Per saperne di più

Bf 110D-3 - Wing Tech Per saperne di più

Focke-Wulf Triebflügel Interceptor Per saperne di più

Special Features: -Wire cutter reproduced by photo-etched parts to recreate scale thickness -Cockpit canopy made from clear plastic -Propellers finely reproduced -Landing gear has crisp detail -Photo-etched parts to upgrade level of detail -Markings by Cartograf decals About the Ju88A-6 One of the most versatile designs of WWII, the Ju88 was a twin-engine multi-role aircraft flown by the Luftwaffe. A total of approximately 15,000 of this vital aircraft were manufactured. One of the more novel versions was the Ju88A-6, which was basically a Ju88A-5 fitted with a balloon cutting device. It was intended to clear the way for a bomber force by cutting the tether cables of barrage balloons. The specific equipment involved a front-mounted fender terminating at the wingtips, with a cable-cutting device installed at each end. The apparatus weighed a total of 380kg, requiring a further 60kg counterweight to be fitted in the tail. Dragon has launched an impressive scale model of this particular aircraft. It is based on Dragon’s highly successful Ju88 1/48 series of kits, so quality and accuracy are ensured. The new balloon cutting device has been reproduced in photo-etched parts so that the thin frame is truly produced to scale and is accurately proportioned. Not only does it feature the fender and cutting devices, but a whole range of other photo-etched components provide upgraded detail. Some of these have even been pre-painted for the added convenience of modelers. On the original aircraft, the extra weight and drag caused the Ju88A-6 to be slow and sluggish, thus making it an easy target. They were soon withdrawn and converted back to standard bombers. This Dragon model is not such a party-pooper, however, for this accurate and spectacularly detailed model is ready to pop balloons! Per saperne di più